Fit-out & Interiors RAMS templates
Fit-out RAMS are about working cleanly alongside everyone else: ceilings, partitions, glazing, screeding and floor finishes in busy, often occupied space. Dust control, manual handling and trade coordination are what reviewers look for.
What principal contractors check in a fit-out & interiors RAMS
- Dust control (on-tool extraction) for cutting board, tiles and screed
- Manual-handling controls for boards, glass units and floor materials
- Coordination with M&E and other trades sharing the area
- Protection of finished surfaces and segregation from occupants where relevant
6 templates
Fit-out & Interiors risk assessment & method statement templates
Pick the task closest to your job, then make it site-specific — add the site, sequence, access, permits and competence before submission.
Fit-out & InteriorsIn the builder
Suspended Ceiling Installation RAMS
Ceilings · Suspended ceilings
Trade taskDust controlManual handling
Build this RAMS→
Fit-out & InteriorsIn the builder
Drylining & Tape Jointing RAMS
Drylining · Drylining & tape jointing
Trade taskDust controlManual handling
Build this RAMS→
Fit-out & InteriorsIn the builder
Glazing & Curtain Walling RAMS
Glazing · Glazing / curtain walling
Trade taskDust controlManual handling
Build this RAMS→
Fit-out & InteriorsIn the builder
Floor Screeding RAMS
Flooring · Floor screeding
Trade taskDust controlManual handling
Build this RAMS→
Fit-out & InteriorsIn the builder
Window Installation RAMS
Glazing · Window installation
Trade taskDust controlManual handling
Build this RAMS→
Fit-out & InteriorsIn the builder
Curtain Walling RAMS
Glazing · Curtain walling
Trade taskDust controlManual handling
Build this RAMS→
Get your fit-out & interiors RAMS done faster
Build a site-specific RAMS draft free during early access — no card or signup required.